Renegade Spirit #649
[Home]

 

Arrival and Setting Up Shop
Fuselage
Tips
Control Column Assembly
Landing Gear
Seats
Stabilizer-Elevator
Rudder-Fin
Ailerons
Cabane Struts
Wings
Fuel Tank
Instruments
Rigging Wings
Covering
Painting
Engine
Wheel Pants
Cockpit
Final Assembly
First Flight

This website contains detail construction photos and information about the Murphy Renegade Spirit Biplane that I am building.

Click on the links to the left to select photos of the various parts of the plane that I have worked on.

I received the Quick Build Kit on October 5, 2000, and started construction on 10/27/2000, after completing the unpacking, inventory and storage of the materials. In addition I prepared my 10' x 20' workshop and built a 4' x 16' worktable according to plans supplied by Murphy Aircraft.

I am located in Lutz, Florida, USA (near Tampa)

The airplane construction is complete and FAA Certification is complete.

Latest photos are on the First Flight at the airport. Thursday January 27, 2005 at 10:45 AM at Pilot Country Airport in west central Florida.

 

P1270125.jpg (22985 bytes)

rolling down the runway

P1270129.jpg (13017 bytes)

taking off

P1270140.jpg (12375 bytes)

landing

P1270116.jpg (30219 bytes)

coming out of the hangar ready to fly

P1120102.jpg (28454 bytes)

in the hangar

 

You can send an email to Bob Donaghy

Bob's Home Page has links to local EAA websites.

Link to Murphy Aircraft

Last updated 10/21/07